The Seagate Ironwolf 110 SSD is made for small to SOHO NAS arrays. While NAS bays do provide cages with both 3.5"/ 2.5" drives, there are some really small form factor NAS specifically made for 2.5" SATA drives for mechanical and solid-state. There are also 3.5"/2.5" hybrid NAS that uses SSDs as additional caching for the primary storage array. Naturally, this would make a market for NAS specific SSDs. This is the Seagate Ironwolf variant. The Ironwolf 110SSD comes with a set of its marketed features- AgileArray firmware and DuraWrite are two of these firmware specific implementations. These NAS SSDs do that have a 5-year warranty with an included 2-year data recovery support. Though the provision for this data recovery support varies between countries.
IntroductionPackaging and SpecificationCloser LookTest Setup and Testing MethodologyAS SSD BenchmarkATTO BenchmarkAIDA64 Access TestBoot Load TestTRIM TestCrystalDisk Mark BenchmarkHDTune…
Typical of the Ironwolf NAS drive series, the SEAGATE IRONWOLF 16TB ST16000VN001 HDD carries 3 years warranty with a spindle speed of 7,200 RPM. These are marketed for Home, SOHO and small business NAS drives, typically up to 8 bays. It comes with a plethora of NAS-specific functions. Its in-house Ironwolf Health Management (IHM) is a 1up from S.M.A.R.T. functions. This emphasis on Prevention, Intervention and Recovery. To use IHM, it needs to work with IHM-enabled NAS units. At the time of writing, it listed ASUSTOR, QNAP, OSAN, Synology, Terra Master and Thecus. There is no support for desktop systems, nor FreeNAS functions- yet.