Kingston HyperX 3K 90GB

Kingston HyperX 3K 90GB SSD Review

  1. Introduction
  2. Packaging and Specifications
  3. Internal Impressions
  4. Test Bench and Benchmarks
  5. Conclusion

_MG_6968_MG_6959

The packaging isn’t too different from HyperX SSD counterpart.  This SSD is with SATAIII interface and backed by 3 years warranty support.

_MG_6971

Kingston makes it clear that the HyperX 3K is meant for desktop/computer workloads and not for server environments on the packaging itself. You’re getting a 2.5″-to-3.5″ SSD bracket with all the screws you’ll need. This is the standalone kit. For those who don’t know, there are 2 version: this is the standalone kit- and the desktop upgrade kit is where you get a screw driver pen, a SATA III cable in blue colour, a cloning software and 2.5″ plastic USB 2.0 casing.

_MG_6970

Kingston also mentions the basic use of this SSD drive in 22 languages, including in Hindi.

_MG_6973_MG_6976

The SSD and the instruction manual is what you get to see as soon as you open the box. Flip the foam over and there’s the tray along with the required screws.

_MG_6981_MG_6983

_MG_6984

Unlike Kingston’s HyperX SSD, HyperX 3K comes with black finish on the top with the usual design.

advspecs

One more point to note that Kingston advertises this SSD with 25nm Intel NAND with 3k P/E Cycles, that 2k lesser compared to HyperX. Now, this is to remind the readers that even with 3k program-erase cycles, you don’t need to worry yourself as a notebook/Desktop end user, even as a power user/ enthusiast.

Total
0
Shares
1 comment
Leave a Reply

Your email address will not be published. Required fields are marked *

Previous Article
Antec Basiq 300w Power Supply

Antec launches Basiq BP300P Power Supplies

Next Article
densbits seagate

Seagate steps inside the consumer SSD market

Related Posts